Welcome to our online shop!

The Greenio shop is all about eco-friendly products. We like to stock anything green, recycled, and rechargeable (with solar, of course). There is a purpose behind every item, where some will donate a percentage to clean water products or for the planting of trees, some are just looking at replacing the plastic alternative.

There isn’t really a limit to the eco-products we will stock, so if you think there is something that our shop needs, then please feel free to get in touch!

Zappi v2 - EV Charger

SKU 00002
Out of stock
Product Details
Microgeneration systems such as Solar PV and small wind turbines are at their most efficient when the generated energy is consumed on-site rather than exporting it to the grid. This is what we call 'self-consumption'.
zappi is a Mode 3 charging station, compatible with all electric vehicles that comply with EN 62196 and EN 61851-1 plug-in electric vehicle standards.
zappi works like any regular charging point but has special ECO charging modes that will benefit homeowners with grid-tied microgeneration systems e.g. wind or solar generation. Two special ECO charging modes automatically adjust charging current in response to on-site generation and household power consumption. In FAST charge mode, zappi operates like an ordinary EV charger.
A grid current sensor (supplied) simply clips around the incoming supply cable. this sensor is used to monitor excess power and when using the special ECO charge modes, zappi will automatically adjust the charge rate in response to available surplus.

• 3 charging modes: ECO, ECO+ & FAST

• Optimises microgeneration self-consumption
• Works with solar PV, wind turbine or micro-hydro systems
• Economy tariff sense input
• Programmable timer function
• Charge and event logging
• Remote control and monitoring add-on option
• Pin-code lock function
• Tap operated display backlight
• Built-in 30mA Type A RCD protection (EN 61008) + 6mA DC RCD protection (EN 62955)
• Built in protection against the loss of the protective neutral and earth (PEN) conductor as required by BS 7671:2018 (The “Wiring Regulations”)
• Integral cable holster (tethered units)
• Supplied with 1 x clip-on grid current sensor (x 3 if purchasing a 3 phase unit)
• Illuminated display – for convenience the display can be illuminated by simply tapping the zappi front cover

Prices start at £695 - get in touch today to find out if you are eligible for the OLEV grant. We can also install nationwide. Pre-order only.

Save this product for later